Osram LED Systems (LS)

Osram LED Systems (LS) manufacture a wide range of LED components that can be assembled to form complete LED illumination systems. As a manufacturer, they offer the tremendous advantage of being able to provide carefully matched systems from a single source. The focus is on flexibility and ease of installation and operation. There are a huge range of shapes, sizes, colours and power options available, ready to be combined into systems.

• Several modules can be connected in parallel or series within the
specified output range.
• Wide permissible ambient temp ranges.
• Electrical isolation between primary and secondary sides (SELV equivalent).
• All units meet the required standards for lighting technology.
• Electronically reversible switch-off upon short circuit, overload and overheating.

|

Flexible LED Lighting Strips & Tapes
LINEARlight and LINEARlightFLEX - Flexible light piece by piece

• LINEARlight Flex is an LED module on a flexible pc board with light
emitted either at the top or at the side. The modules can be used for long illuminated lines, for backlighting complex structures and for illuminated advertising.
• variable lengths by cutting at convenient breakpoints
• high luminous flux due to OSRAM Power TOPLED
• low profile (<5mm) allows installation where space is limited
• available in all LED colours
• simple installation via adhesive tape on rear of flex
• also available LINEARlight Colormix versions which feature 30 RGB LEDs for dynamic colour-changing applications. PC driver S/W to support.
• LINEARlight POWER versions available on flexible conductor plate for even more lighting power.
|

Backlighting Solutions
BACKlight BL02 – The solution for the simplest possible installation
BACKlight BL04 - for applications needing higher brightness
BACKlight LM03A – ideal for backlighting complex structures

|

LED Lighting Power Supplies
OSRAM also offers a range of OPTOTRONIC electronic control gear and controllers ideally matched to the LED modules.
• Electronically stabilised DC voltage/current while providing highest efficiency and optimum functionality.
• System design of constant voltage OPTOTRONIC converters and LED modules with integrated current control ensures it will always be possible to run the latest LED generations with the modules.
• The OPTOTRONIC family comprises converters with a rated capacity from 6 W up to 75 W.
• Smart Power Supply - OT 50 and OT 75 - always ensure perfect performance of your LED system independent of ambient temperature and any differences between individual LEDs
• DALI control units available. Solutions available for single colour, RGB, dimmable, sequencing and colour-mixing applications, at the following powers:
• 10 V and 24V constant voltage
• 350 mA, 500mA and 700mA constant current

|

LED lighting modules featuring Osram Dragon LEDs
DRAGON-X: Hexagonal metal plate featuring a high-flux Golden Dragon LED available with integrated optics for 12, 30, 60 or 120 beams. Includes 20cm cable for use as a compact high power luminaire.
DRAGONpuck is a compact High-Flux LED light source with high light
intensity designed for localised spotlight use. Perfectly matched to OSRAM OPTOTRONIC electronic control gear. Dimmable by Osram PWM electronic control gear. Can only be connected in serial.
DRAGONeye: IP65 protected compact mini spot with one High-Flux Golden DRAGON
LinearLIGHT DRAGON: Powerful 6x Golden Dragon low profile lighting module. Available in white, 4 colour temperatures. Easy connection with OSRAM CONNECTsystem.
The COINlight-OSTAR® module is a round high-power spotlight with an integrated primary heat sink. It generates the same amount of light as a 20W spotlight with a 38° beam angle from one hi-power LED.
DRAGONchain – LED chain consisting of 18 metal core boards each with 2 Golden Dragon LEDs linked by flexible cables, ideal for illumination and backlighting of complex structures.
|

DRAGONtape
• 6 High-Flux OSRAM DRAGON LEDs in series on flexible board
• Perfectly matched to OSRAM OPTOTRONIC electronic control gear
• Dimmable by pulse width modulation (PWM) with OSRAM electronic control gear
• Separable in units between 1-6 LED
• Dimensions of smallest unit with 1 LED: 25 mm x 25 mm
• Optics with different reflected beam angles are available as accessories
|

The guarantee for the Osram systems, LED modules and Optotronic control gear can be extended to 3 years. Many of the solutions are fully available as IP-6x compliant products.